The oil pump is very important to the 500kw generator. Its correct operation is the prerequisite for using the generator. We will explain to you how to do a good job in the maintenance and inspection of the oil pump. As we all know, the function of the oil pump is to make the generator set circulate in the low pressure oil pipe car, and can provide enough gasoline and diesel for the diesel engine pump under the working pressure. The volume of the oil pipeline should be 3-4 times of the full load, and the ignition advance angle should be large. Therefore, before the diesel generator set starts, the gas in the fuel pipe can be discharged by the manual pump on the oil pump. Only in this way can the gasoline and diesel oil within 10 meters of the oil pump management center be sucked in within 0.5 minutes, and the rocker arm nut should be tightened after the oil pump exhausts. After the oil pump is used for a long time, its parts should also be checked and maintained. In the case of inspection, what common problems should we pay high attention to? Then we will analyze it for you.
1. If there are damages, dents, or black spots on the floor plan of this product, grind it on the tablet with abrasive paste. If the condition is serious, it should be replaced.
2. If the product seat surface layer on the cover is seriously damaged or uneven, it should be removed and replaced.
3. The small chain and the small chain sleeve are seriously damaged, resulting in the expansion of the gap. The worse the sealing, the more serious the leakage of the 500kw generator. When replacing, you need to connect the small chain with the cover, or choose a small chain with increased specifications, but you need to study each other.
4. The mandrel of the coarse filter in the high-pressure hose is easily blocked by cotton-like dirt, which damages the provided oil. Therefore, attention should be paid to the cleaning of gasoline and diesel and the removal of waste on the filter element.
5. When the rubber ring of the piston rod of the hand steam pump is damaged, it should be replaced in time. After the center of gravity of the oil pump is assembled, it is required that the moving parts such as the piston rod and the chain of the oil pump should have a smooth movement during the entire itinerary without obstruction or jamming. Gasoline pumps should be light and flexible. Please pay attention when installing this product. It needs to be embedded in the yellow groove of the spring.
It is not difficult to see how important the maintenance of the oil pump of the diesel generator set is. During the use of diesel generator sets, the maintenance of the oil pump is often ignored. In fact, the oil pump is a key part of the generator, in order to maintain the long-term durability of the generator, the oil pump parts should be carefully inspected to increase the service life of the 500kw generator.
Post time: Nov-26-2022