Beijing Woda Power Technology Co.. Ltd is a professional diesel generator set manufacturer with a history of more than 14 years. We have our own professional production lines, including open type diesel generator, silent generator, mobile diesel generator. etc.
1. Add cushion to control leakage. Oil leaks at the leak-proof gasket of the oil pipe joint in the diesel unit. You can add a layer of double-sided smooth thin plastic pads on both sides of the leak-proof gasket, and tighten it firmly to prevent leakage.
2. Dimensional recovery glue to cure leakage. When the shaft and bushing, bearing and bearing seat, valve and valve acne, self-tightening oil seal, packing, etc. of the diesel engine leak, the size restoration glue can be applied to the cleaned and worn parts of the common parts, and the wear resistance and mechanical strength will be formed after curing. Higher film layer.
3. Use pumping to control leakage. When the oil tank bottom case, cylinder head, gear chamber cover, crankcase back cover and other places of the diesel unit leak from paper pads, if the paper pads are intact and the joint surfaces are clean, apply a layer of butter on both sides of the paper pads. Tighten the bolts to prevent leakage; if you want to replace the paper pad, soak the new paper pad in diesel oil for 10 minutes, take it out and wipe it off, and put a layer of butter on the joint surface before installing it.
4. Leakage control method with liquid sealant. Interfacial leakage and crushing leakage caused by solid gasket defects on diesel generator sets. Apply liquid sealant on the cleaned solid gasket joint surface, and form a uniform, stable and continuous adhesive peelable film gasket after curing, which can prevent leakage.
Post time: Feb-13-2023